RAVENOL WIV II SAE 0W-30 is a full synthetic low friction engine oil with CleanSynto® technology for VW and Audi petrol engines and diesel engines (from model year 2000 with interchange interval WIV) including pump-nozzle engines (Pumpe-Düse-Motoren). Minimizing friction, wear and fuel consumption, excellent cold start characteristics. Extended oil change intervals according to the manufacturer's instructions.
RAVENOL WIV II SAE 0W-30 has been specially developed for VW and Audi petrol engines and diesel engines (from model year 2000 with intermittent extension WIV) including pump-nozzle engines. It allows significantly longer maintenance intervals. Excellent cold start characteristics due to a faster oiling of the system. It ensures reduced friction losses and high oil film stability as well as excellent viscosity-temperature behavior.
Application Note
RAVENOL WIV II SAE 0W-30 can be used in all long-life vehicles (except for models that require a product to VW standard 503 01).
Attention: Extended oil change intervals must never be used in engines of non-WIV vehicles. In this case, RAVENOL WIV II SAE 0W-30 may only be used with change intervals that are described by the manufacturer.
Characteristics
- It is recommended for VW and Audi gasoline and diesel engines (model year 2000 with WIV service interval prolongation), including pump-nozzle engines.
- A special low-friction character and an excellent range by special additives.
- An excellent engine protection, even after a cold start and under stricter conditions.
- Guaranteed for maximum wear protection and engine cleanliness combined with reduced fuel consumption.
- Provides extended oil change intervals due to its exceptional product stability.
- Supports the protection of the environment through reduced emissions.
Technical Product Data
| Property | Unit | Data | Audit |
|---|---|---|---|
| Density at 20 °C | kg/m³ | 843,0 | EN ISO 12185 |
| Colour | braun | VISUELL | |
| Viscosity at 100 °C | mm²/s | 10,1 | DIN 51562-1 |
| Viscosity at 40 °C | mm²/s | 55,3 | DIN 51562-1 |
| Viscosity Index VI | 174 | DIN ISO 2909 | |
| HTHS Viscosity at 150 °C | mPa*s | 2,92 | ASTM D5481 |
| CCS Viscosity at -35 °C | mPa*s | 5351 | ASTM D5293 |
| Low Temp. Pumping viscosity (MRV) at -40 °C | mPa*s | 14.130 | ASTM D4684 |
| Pourpoint | °C | -45 | DIN ISO 3016 |
| Noack Volatility | % M/M | 10,3 | ASTM D5800 |
| Flashpoint | °C | 220 | DIN EN ISO 2592 |
| tbn | mg KOH/g | 10,2 | ASTM D2896 |
| Sulphated Ash | %wt. | 1,12 | DIN 51575 |
All indicated data are approximate values and are subject to the commercial fluctuations.