RAVENOL SMO SAE 5W-30 Synthetic Multi Oil is synthetic low friction motor oil with CleanSynto® technology for passenger car gasoline engines with and without turbo-charging and direct injection.
RAVENOL SMO SAE 5W-30 achieves a high viscosity index through its formulation with special base oils. The excellent cold start behaviour provides an optimum lubricating safety during the cold run phase.
Because of a considerable fuel saving RAVENOL SMO SAE 5W-30 contributes to protect the environment by reducing the emissions.
RAVENOL SMO SAE 5W-30 minimizes friction, wear and fuel consumption with excellent cold start characteristics. Suitable for extended oil change intervals where recommended by manufacturer.
Application Note
RAVENOL SMO SAE 5W-30 is suitable for demanding engines as high performance low friction engine oil. The specifications API SN Resource Conserving (RC) and ILSAC GF-5 are backward compatible with the respective previous specifications.
Characteristics
- Fuel economy in part and full power operation
- Excellent wear protection and high viscosity index also under high-speed driving conditions, the long life of the engine
- Excellent cold starting characteristics also at low temperatures below -30°C
- A safe lubricant film at high operating temperatures
- Low evaporative tendency, so lower oil consumption
- No deposits in combustion chambers, in the piston ring zone and valves
- Neutrality towards sealing materials
- Extended oil change intervals to protect natural resources
Technical Product Data
| Property | Unit | Data | Audit |
|---|---|---|---|
| Density at 20 °C | kg/m³ | 849,0 | EN ISO 12185 |
| Colour | gelbbraun | VISUELL | |
| Viscosity at 100 °C | mm²/s | 9,8 | DIN 51562-1 |
| Viscosity at 40 °C | mm²/s | 56,6 | DIN 51562-1 |
| Viscosity Index VI | 159 | DIN ISO 2909 | |
| HTHS Viscosity at 150 °C | mPa*s | 3,07 | ASTM D5481 |
| CCS Viscosity at -30 °C | mPa*s | 5700 | ASTM D5293 |
| Low Temp. Pumping viscosity (MRV) at -35 °C | mPa*s | 17.200 | ASTM D4684 |
| Pourpoint | °C | -39 | DIN ISO 3016 |
| Noack Volatility | % M/M | 9,6 | ASTM D5800 |
| Flashpoint | °C | 236 | DIN EN ISO 2592 |
| tbn | mg KOH/g | 7,4 | ASTM D2896 |
| Sulphated Ash | %wt. | 0,8 | DIN 51575 |
All indicated data are approximate values and are subject to the commercial fluctuations.