Category:
Passenger car motor oil
Item number:
1112111
Viscosity:
10W-40
Oil type:
Semi-synthetic
Application area:
Car
Technology:
Clean Synto®
RAVENOL DLO SAE 10W-40 is a semi synthetic engine oil with CleanSynto® Technology for passenger car diesel engines with and without turbocharging and direct injection. Minimizes friction, wear and fuel consumption. Offers excellent cold start protection and is suitable for extended oil drain intervals according to manufacturer's instructions.
Application Note
RAVENOL DLO SAE 10W-40 is suitable for year-round use in all modern passenger car diesel engines which require this grade of engine oil. Ideal for both turbocharged and non-turbocharged engines, it is also suitable for use in gasoline engines which require this type of product.
Characteristics
- High wear protection
- Fuel efficient formulation
- Excellent detergent and dispersant package for cleaner engines
- Prevention of black sludge and carbon deposit formation
- Long service life through high oxidation stability
- Excellent cold starting properties
- A very good viscosity-temperature behavior
- Low volatility
- Catalyst suitability
Technical Product Data
| Property | Unit | Data | Audit |
|---|---|---|---|
| Density at 20 °C | kg/m³ | 862,0 | EN ISO 12185 |
| Colour | gelbbraun | VISUELL | |
| Viscosity at 100 °C | mm²/s | 14,4 | DIN 51562-1 |
| Viscosity at 40 °C | mm²/s | 97,6 | DIN 51562-1 |
| Viscosity Index VI | 153 | DIN ISO 2909 | |
| HTHS Viscosity at 150 °C | mPa*s | 4,0 | ASTM D5481 |
| CCS Viscosity at -25 °C | mPa*s | 4900 | ASTM D5293 |
| Low Temp. Pumping viscosity (MRV) at -30 °C | mPa*s | 18.000 | ASTM D4684 |
| Pourpoint | °C | -39 | DIN ISO 3016 |
| Noack Volatility | % M/M | 9,5 | ASTM D5800 |
| Flashpoint | °C | 230 | DIN EN ISO 2592 |
| tbn | mg KOH/g | 10,0 | ASTM D2896 |
| Sulphated Ash | %wt. | 1,3 | DIN 51575 |
All indicated data are approximate values and are subject to the commercial fluctuations.