RAVENOL VPG SAE 75W-90 is a full synthetic axle drive oil based on the latest full synthetic components for Marinevehicles.
RAVENOL VPG SAE 75W-90 is preferably used in the marine environment. It contains high-quality synthetic base oils that are additivated with a balanced combination of active ingredients. This ensures high load-carrying capacity, wear protection and oxidation stability.
Application Note
RAVENOL VPG SAE 75W-90 is excellent for use in heavily loaded axle drives of VOLVO Penta.
RAVENOL VPG SAE 75W-90 is a gear oil which is equally suitable for lubrication in boat and marine gearboxes from IPS and Aquamatic. The regulations of the boat and gearbox manufacturers must be observed.
Characteristics
- high additive reserves for prolonged oil change intervals according to the manufacturer instructions
- excellent cold flow properties
- good wear protection protects the gearbox
- Fuel savings even with short distances in low outside temperatures
- stable lubricating film even under high stress
- extreme low pour point
- Can be used at changing temperatures due to the high viscosity index
Technical Product Data
| Property | Unit | Data | Audit |
|---|---|---|---|
| Density at 20 °C | 868,0 | EN ISO 12185 | |
| Colour | gelb | VISUELL | |
| Viscosity at 100 °C | mm²/s | 15,8 | DIN 51562-1 |
| Viscosity at 40 °C | mm²/s | 106,8 | DIN 51562-1 |
| Viscosity Index VI | 158 | DIN ISO 2909 | |
| Brookfield Viscosity at -12 °C | mPa*s | 63400 | DIN EN 60243-1 (20°C) |
| Pourpoint | °Celsius | -57 | DIN ISO 3016 |
| Flashpoint | °Celsius | 190 | DIN EN 60243-1 (20°C) |
| Seq. I at 24 °C | 0/0 | ASTM D892 | |
| Seq. II at 93,5 °C | 0/0 | ASTM D892 | |
| Copper Corrosion (24h/120 °C) | 1a | ASTM D130 |
All indicated data are approximate values and are subject to the commercial fluctuations.